北京中航鼎力仪器设备有限公司

 M-200橡胶塑料滑动摩擦磨损试验机（计算机控制）M-200 rubber plastic sliding friction and wear testing machine (computer control)一、适用范围及功能Applicable scope and function符合标准：GB/T 3960-1983 塑料滑动摩擦磨损试验方法 GB/T 9141.8-1999 柔性石墨板材滑动摩擦系数测试方法Meet the standard: 3960-1983 GB/T plastic sliding friction and wear test method 9141.8-1999 GB/T flexible graphite sheet sliding friction coefficient test method另外本厂生产的计算机控制塑料滑动摩擦试验机是在现有电子塑料滑动摩擦试验机的基础上又增加了很多试验功能，可以同时显示扭矩-时间曲线，随意设定试验次数，显示当前试验次数，In addition to the production plant computer control plastic sliding friction testing machine is on the basis of the existing electronic plastic sliding friction testing machine and increase the many test functions, can also display the torque time curve arbitrarily set the number of trials, displays the current number of tests,设定时间及当前试验时间等多种功能，本机还配有彩色打印机，可以打印出带有曲线，表格数据，试验单位名头的精美的试验报告单。Setting time and the test time and other functions, the machine with color printer, print out with a curve, data table, exquisite test report test unit, the name of the first single.适用于塑料制品、橡胶制品、石墨板材或其他复合材料的滑动摩擦，磨损性能测试，也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。也可对试验中试样的磨擦力、磨擦系数和磨损量进行测定。Suitable for sliding friction and wear properties of plastic products, rubber products, graphite sheets or other composite materials, and can also be used to determine the friction force, friction coefficient and wear of test specimens. The friction force, friction coefficient and wear rate of the samples can be measured in the test.本机采用高精度扭矩传感器，16 位单片机电子处理系统，使得本仪器各项测试指标精度非常高。由于集成程度很高，所以设备本身的稳定性极好，本机具有一次设置，全自动运行，实验结束后自动停机，This machine adopts the high precision torque sensor, 16 bit single chip microcomputer electronic processing system, makes this instrument each test target precision is very high. Because the integration level is very high, so the stability of the equipment itself is excellent, the machine has a set, automatic operation, automatic shutdown after the end of the experiment,并检测磨损程度，同时通过打印机打印试验数据等功能。是各个科研单位，大学，企业实验室的必备检测设备。And the degree of wear and tear, and through the printer to print test data and other functions. It is a necessary testing equipment for all scientific research institutes, universities and enterprises.本仪器融合了当前最新的智能电路系统进行控制，并结合老式M-200摩擦磨损试验机的功能进行升级改造而成，本仪器具有测控精度高，操作便捷等优势，是科研院所、质检机构、实验室研究首选的试验设备。Scientific research institutions, quality inspection institutions and laboratories and study is the preferred test equipment and the instrument fusion of the latest intelligent circuit system control, and combined with the old M-200 friction wear testing machine, function upgrading and. The instrument has high control accuracy, convenient operation and other advantages.M-200型摩擦磨损试验机主要由试验主机及智能控制系统两大部分构成，通过微机控制系统进行操作试验，在试验过程中同时可以显示数值、扭矩、时间曲线，并可以随意设定试验次数，显示当前试验数值，M-200 friction wear testing machine is mainly composed of the host and the intelligent control system consists of two parts, through the microcomputer control system for testing operations, in the test process also can display the numerical, torque and time curve, and can be arbitrarily set the number of trials and display the current test data,设定时间及当前试验时间等多种功能，随机配备彩色打印机，可以打印出带有曲线、表格数据等标准要求的试验报告。Setting time and the current test time and other functions, random equipped with color printer, you can print out with the curve, form data, such as the standard requirements of the test report.二、产品参数及精度：Two, product parameters and accuracy:1、试样尺寸： 30mm×7mm×6mm1, sample size: 30mm * 7mm * 6mm2、转动速度： 0-500转/分 （可调）2, the speed of rotation: 0-500 (adjustable)3、负 荷： 196N ± 0.1%（可增至392N）3, load: 196N + 0.1% (can be increased to 392N)4、摩擦环尺寸：￠40×10mm ，倒角0.5×45°，外圆表面与内圆同心度偏差小于0.014, the friction ring of size: 40 x 10mm, 0.5 x 45 degree chamfer, surface of the outer circle and inner circle concentricity deviation is less than 0.015、摩擦环材质：45号钢,淬火,热处理HRC40-45,外圆表面光洁度▼85, the friction ring material: 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish size 86、摩擦力矩： 0--4N·m6, friction torque: M / 0--4N7、砝码重量：4KG砝码一件，1KG砝码4件，可实现重量叠加功能。7, weight weight: 4KG weight of one, 1KG weight 4 pieces, can achieve weight superposition function.8、速度精度：1%8, speed accuracy: 1%9、负荷精度：0.5%9, load accuracy: 0.5%10、摩擦力矩精度：1%10, friction torque accuracy: 1%11、计数器精度：1S11, counter accuracy: 1S12、传感器测量精度：1% FS12, sensor measurement accuracy: 1% FS三、主要配置及附件：（计算机控制）Three, the main configuration and accessories: (computer control)1、试验主机一台1, a test host2、高精度扭矩传感器一只2, high precision torque sensor3、计算机数据采集卡一块3, a computer data acquisition card4、计算机一台（品牌）4, a computer (brand)5、彩色激光喷墨打印机一台5, color laser inkjet printer6、计算机控制软件一套6, computer control software set7、4Kg 砝码两件（备用一套）7, 4Kg weight two (spare one set)8、标准磨擦环四件（备用两件）8, standard friction ring four (spare two)9、产品使用说明书一份9, a copy of the instructions of the product10、产品合格证10, product qualification certificate11、产品装箱单一份11, product packing list12、整机重量：约87 公斤12, the weight of the whole machine: about 87 kg